Welcome to Shivam Enterprises

About Shivam enterprises

THE COMPANY WAS ESTABLISHED IN 1992.our company manufactures tile adhesive.Shivam Enterprises Inc.(our company) is committed to strive customer delight by manufacture and supply of products through continual improvement.

Read more
image01

Adhesive (Block Laying AAC)

Our New Product

AAC Block Adhesive is a processing plant arranged mix of painstakingly chose crude materials, Portland concrete and evaluated totals and polymers.

Read more
image02

Best Regards

Welcome to website

THE COMPANY WAS ESTABLISHED IN 1992.our company manufactures tile adhesive.Shivam Enterprises Inc.(our company) is committed to strive customer delight by manufacture and supply of products through continual improvement.

Read more
image03

Welcome to Shivam Enterprises

THE COMPANY WAS ESTABLISHED IN 1992.our company manufactures tile adhesive.Shivam Enterprises Inc.(our company) is committed to strive customer delight by manufacture and supply of products through continual improvement.we sell our products all over India.

Floor and wall thin-set Adhesive is a high performance dry set adhesive for use with water or latex for installing ceramic Tiles,Marble and Stone using the thin-set installation,It has high Tack and Will Hang Wall Tile without slippage. Tilopoxy is our second product which is Astainfree ,Colour-Fast,Chemical Resistant,100% Solid epoxy Grout for ceramic Tiles, Marble and Stone.CP-100 is Ideally suited for Residential and Commercial Installations where Materials must resist Physical Abuse,Shock and Chemical Attack.

Adhesive (Block Laying AAC)

AAC BLOCK ADHESIVE is a factory prepared blend of carefully selected raw materials, portland cement and graded aggregates and polymers. Designed for use with water to produce high strength thixotropic mortar, for laying aerated light weight concrete, fly ash bricks, cement hollow blocks, cellular concrete blocks or smoothing over the block work surface in layers of upto 12mm thickness, that meet and exceed the requirements of National and International Standards.

Best Regards

THE COMPANY WAS ESTABLISHED IN 1992.our company manufactures tile adhesive.Shivam Enterprises Inc.(our company) is committed to strive customer delight by manufacture and supply of products through continual improvement.we sell our products all over India.

Floor and wall thin-set Adhesive is a high performance dry set adhesive for use with water or latex for installing ceramic Tiles,Marble and Stone using the thin-set installation,It has high Tack and Will Hang Wall Tile without slippage. Tilopoxy is our second product which is Astainfree ,Colour-Fast,Chemical Resistant,100% Solid epoxy Grout for ceramic Tiles, Marble and Stone.CP-100 is Ideally suited for Residential and Commercial Installations where Materials must resist Physical Abuse,Shock and Chemical Attack.

Our Products

project 1

Tile Mate Type-1 (ISI Certified)

Dual use: For both floors and walls excellent non-sag formula smooth, easy to use improved impact resistance increased flexibility suitable substrates: concrete cement mortar beds ceramic tiles and stones concrete masonry cement plaster brick monsry cement terrazzo (package in 20 kg bag for all products).

project 2

Tile Mate (Color Grout)

Dual use:for both floors and walls excellent non-sag formula smooth, easy to use improved impact resistance increased flexibility suitable substrates: concrete cement mortar beds ceramic tiles and stones concrete masonry cement plaster brick monsry cement terrazzo (package in 20 kg bag for all products).

project 3

Tilopoxy CP-100 (ISI Certified)

For Epoxy Grout
Stain free Colour-fast Easy to install and clean Chemical and Temperature Resistance Non-Cracking OR Powdered water Cleanable when Fresh.

Applications (USAGE)
Kitchens, Bathrooms, Swimming-Pools, Fountains ,Hospitals ,Operation Theatres ,Sterilization Rooms ,Restaurants ,Cafeterias ,Light Industrial Applications And High Traffic Areas. Package in 5.4 Kg And 1.6 Kg .

project 4

SIRI (ISI Certified)

Dual use: For both floors and walls excellent non-sag formula smooth, easy to use improved impact resistance increased flexibility suitable substrates: concrete cement mortar beds ceramic tiles and stones concrete masonry cement plaster brick Monsry cement terrazzo (package in 20 kg bag for all products).

project 5

Glass Mosaic Tile Adhesive

Application

Surface to be tiled must be dry, clean and free from all contamination. Suitable surface include Concrete or cement – sand screed / plaster rendering.

Advantage:

1. Specially designed adhesive for application in submerged conditions.
2. Excellent adhesion properties.
3. Easy to apply.
4. Ready to mix product only water to be added.
5. Slip resistance with longer pot life

Colour

White, Oack

Size

20 Kgs.

Shivam White Polymer Modified glass Mosaic tile adhesive is suitable for interior and enterior use. Excellent for swimming pools & water bodies.

project 6

Simpolo (Polymer Base Non ISI Certified)

Dual use: for both floors and walls excellent non-sag formula smooth, easy to use improved impact resistance increased flexibility suitable substrates: concrete cement mortar beds ceramic tiles and stones concrete masonry cement plaster brick monsry cement terrazzo (package in 20 kg bag for all products).

project 7

Premia (Tile Adhesive ISI for Wall & Floor)

Glassicaa is a fantastic quick setting single Component high polymer tile adhesive to fix Glass Tiles, Glass motives, Marble mosaic etc on walls & floors both in interior & exterior application.

Application:
Bathrooms, Kitchen, Decoration wall / floors.

Advantages:
1. High polymerized
2. High Flexibility
3. High Strength
4. Water Mixable
5. High Shear Strength

project 8

Adhesive (Block Laying AAC)

AAC Block Adhesive is a processing plant arranged mix of painstakingly chose crude materials, Portland concrete and evaluated totals and polymers. Intended for use with water to deliver high quality thixotropic mortar, for laying circulated air through light weight solid, fly slag blocks, bond empty squares, cell solid pieces or cover up the piece work surface in layers of up to 12mm thickness, that meet and surpass the necessities of National and International Standards.

Packaging 20 kg

Colour Grey

Advantages
1. Long working time
2. No curing required after block work is done
3. Improved adhesion between two blocks
4. Fast & economical

Area Of Application
For interior and exterior use for preparing thin bed block mortar for ALC and cellular concrete blocks.

project 9

Admix (For Grout)

White polymer for use the cement base ADMIX grout. Suitable for use in interior and exterior locations. In both dry and wet surface conditions, providing greater adhesion to the tile and edges e.d. glass mosaic and fully vitrified tiles and it provides greater abrasion resistance particularly important in heavily trafficked areas such as shopping malls etc.

Precaution :
Keep out of reach of children, where suitable protective closing , gloves and eyes/Face protection.

Advantage
1. Increase flexural Strength and flexibility
2. Improve grout performance
3. Increase life of grout
4. Reduce water permeability

Pack Size :100g & 300g. bottles

project 9

Tile Cleaner

Tile cleaner is as trusted product with new formulation ideal for cleaning all type of tiles. Can be applied interior / exterior wall & floors.

Application
Dilute to the correct ratio as required use 1 part of cleaner with 2 part of water. Heavily soiled area may require as undiluted solution.
Note : Always test initially on small area be for using on large areas , a patch test is required.

Note: No Liability will be entertained in any case

Advantages:
1. Easy to use
2. Fast acting
3. Interior & Exterior
4. Economical
5. New formula

Packing: 500ml Bottle.

project 9

Rebclean Power

Rust remover, cleaning and etching agent

Uses Rebclean Power is used as a rust remover from steel bars prior to encasing in concrete 1 micro concrete. It can also be used on other steel surfaces prior to coating with epoxy systems.

Advantages
Safe with metals (except zinc and galvanized steel), wood, glass, plastic and rubber. No corrosive action. Penetrates oil and grease.
Rebclean Power leaning agent is a combination of acid based material, corrosion inhibitors and dispersing agents and is supplied as a clear green solution.

Technical Support
Properties
Specific gravity : 1.16 1.22 @ 250 C

Application instructions
For rusted metal (iron base)

Apply Rebclean Power with brush for complete wetting of rusted metal surface and allowed to react it for 16-24 hours. After 24 hours, a white layer will appear which will protect further corrosion of metal 1 steel for about 5.7 days. Before applying protective coating, the surface should be wire brushed and thoroughly cleaned for dust with dry cloth. Removal of rust and mill scale Prewet the floors, then using a stiff bristle broom, brush the affected areas with a solution of Rebclean Power cleaning agent and water. Strength of the solution required will vary but should be between 1 : 1 and 1 : 4 (Rebclean Power cleaning agent to water).

When the action has finished, wash down thoroughly with clean water. Wire brush again to remove remaining loose material and finish by thoroughly washing down with clean water. Repeat if necessary. High degree of rust or scale can be removed by soaking in the Rebclean Power cleaning agent solution for 60 minutes.

Estimating Coverage
Approx. 2.0 - 2.5 m2/L

Note coverage depends on the rusted area and the depth of deposition.

Packaging

Rebclean Power cleaning agent is available in 112, 1, 5 L containers.

Storage

Shelf life: At least 1 year in original sealed containers under normal warehouse conditions.

Precautions

Health & Safety instructions

Rebclean Power cleaning agent is acid based and should be handled with care. It attacks zinc, aluminum and putty. If in doubt about its effect on a material, test small area before application.

Avoid contact with skin. Rubber gloves and goggles should be worn. Wash spillages with plenty of water. Enclosed areas should be well ventilated. If contact with eyes occurs, wash immediately with water and seek medical advice.

project 9

Acryfin 2K

Acryfin 2K is a two component cementitious & acrylic flexible waterproofing & protective coating composed of best quality portaland cement, properly selected & graded aggregates, additives & acrylic emulsion polymer as a binder. It is applied to waterproof and protect concrete and similar structures. specially formulated for swimming pools, retaining walls, pile Heads, water tanks, submerged tunnels, sumps. bridge decks, marbles, granites and a wide variety of extreme service class structures because on curing it forms an excellent elastomeric, waterproof & protective layer over the substrate.

Areas of Application

Acryfin 2K can be applied to new or old concrete structures that are structurally sound and strong, Basement retaining walls.
Structural surfaces of cellars.
Concrete roof slabs, floors, balcony floor slabs.
Water tanks ,swimming pools, Bridge decks Canals and dam walls.
Structural surfaces of dykes.
Waterproof coating (bottom coat) for marble, granite and other natural stones.
Suitable for steam room waterproofing.
Sewage treatment plants for special applications such as areas where more thick plaster application is needed.

Features & Benefits
1. Flexibility – Provides a flexible & low permeable coating.
2. Water permeability - Excellent resistance to ingress of water.
3. Slip resistant - Provides slip resistant coating.
4. Waterproof - Waterproof for concrete structures.
5. Adhesion - Excellent adhesion to concrete. natural and artificial stone.
6. Diffusion - Excellent resistance to chloride ion diffusion and carbon dioxide.
7. Low temperature resistant - Resistance to freeze-thaw cycles and de-icing salts.
8. Carbonation - Prevents carbonation of cement concrete.

Method of Application
1. SURFACE PREPRATION
The surface must be strong & free from dirt, dust & loose particles thoroughly wire brush the surface & clean the dust by air compressor or wash the surface with water. Oil & grease must be removed using degreasing solvents. Any damaged surface must be repaired by using polymer modified repair mortar.
2. MIXing
Shake well the liquid component to a homogenous milky colour , before mixing transfer entire quantity of liquid component into a suitable clean mixing vessel, gradually start addition of powder component under constant mixing with a stirrer using a pneumatic or electric power tool (1 kw) at slow speed at 250 — 300 rpm for 3- 5 minutes to a homogeneous & uniform free flowing slurry.

project 9

Shivfloor - SLC

It’s made with quality grade materials and as per industrial guidelines, our epoxy self leveling coating is long lasting. As such, the range is used in pharmacy units, hospitals, automobile plants and industrial machines & steel structure units in the country. Available at the cost effective range, this epoxy self leveling coating becomes a wise investments for lots of our clients.

Features:
1. Two component system
2. 0ffers tough coating.
3. Coating lasts long
4. Available in different color choices

NON - Metallic Floor Hardener

We are backed by our in depth domain knowledge of manufacturing, supplying, and exporting a wide assortment of Floor Hardeners including Non-Metallic Floor Hardener. It finds wide ranging applications in heavy traffic industrial floors, loading areas, warehouses, chemical and other processing plants, distribution centers, vehicle maintenance centers, and so forth. It imparts 150 per cent to 200 per cent more abrasion resistance to plain cured concrete to become integral part of the same. It also minimizes dusting by reducing porosity.

Features:
Flawlessly blends with concrete Highly abrasion resistant

project 9

Metallic Floor Hardener

Provide extra toughness to your floor with our industrial standard non-oxidizing, heavy duty metallic floor hardener. It is used in airline hangers, warehouse & factory floors & other heavy duty commercial & industrial areas where light reflective, non metallic floors are specified. We offer this premium non-oxidizing, heavy duty metallic floor hardener range at the industry leading prices.

Features:
1. Offers upto 600% abrasion resistance
2. Suitable for plain cured concrete
3. Integral concrete part
4. Minimizes porosity
5. Reduces dusting

project 9

Color Floor Hardener Proofing

We fabricate premium Color non - metallic floor hardener range for areas where floor surfaces will be subjected to a range of duty service & where light reflective, non metallic floors are specified. The range is used for airline hangars warehouse & factory floors, parking garages, auto service centers & commercial & industrial facilities. Our durable and cost effective Carborundum based non-metallic floor hardener range is widely appreciated by our domestic clients.

Features:
1. Gives 200 to 250% abrasion resistance
2. This resistance degree is only provided to plain cured concrete floors
3. Integral part of concrete floors
4. Decreases porosity
5. Needs less dusting

project 9

Cementitious Water Proofing

We are one of the trusted manufacturers of Cementitious water proofing coating in India. The range is offered in compliance with all industrial norms & standards to suit the varied purposes of our valued clients. Our cementitious water proofing coating range is tested for quality. It is applicable for water tanks, bathroom slabs, masonry walls, sloping roofs and portable water-tanks.

Features: 1. Reliable cementitious water-proofing compound 2. Suitable for inside /outside part of the tank

project 9

Acrylic Polymer Modified Water Proofing Coating

Qualitative range of acrylic polymer modified water proofing coating is manufactured in our certified company. Our product range is cost effective and durable. The entire acrylic polymer modified water proofing coating range is preferred for terrace slabs, sloping roofs & basements. Hence the range is opted for raw water reservoir, swimming pool & water retaining structures.

Features: 1. Waterproofing based on acrylic copolymer 2. Heavy duty, two component system 3. Higher vapor permeability feature of the concrete

project 9

Concrete Water Proofing Admixture

Our concrete water proofing admixture is generally used for tanks, basements water retaining structures water proof. This reliable and long lasting range of our company is highly suitable for reservoirs and numerous concrete applications. This special concrete water proofing admixture avoids water leakage by improving concrete quality.

Features:
1. Improves workability of concrete
2. Reduces permeability
3. Is available in solvent & powder forms

project 9

Corrosion Protection Coatings

Fabricated by experts, our corrosion protection coatings have longer service life. These corrosion protection coatings use high grade raw materials sourced from certified vendors in the country. We also provide our customers with our customized solutions as specified by them at the competitive prices. Highly recommended zinc rich epoxy primer is offered by us to the clients at the market leading prices. The range of zinc rich epoxy primer is preferred for mild steel, interior of tanks, fertilizer equipments, chemical, refinery, petrochemical plants, complexes and more. It can be coated with PU/Epoxy.

Features
1. Acts as sacrificial cathode to Corrosion resistant
2. Resistant to different chemicals
3. Provides higher flexibility
4. Offers good abrasion resistance

  • project 4

    SIRI (ISI Certified)

  • project 8

    Adhesive (Block Laying AAC)

  • project 1

    Tile Mate Type-1 (ISI Certified)

  • project 2

    Tile Mate (Color Grout)

  • project 3

    Tilopoxy CP-100 (ISI Certified)

  • project 5

    Glass Mosaic Tile Adhesive

  • project 6

    Simpolo (Polymer Base Non ISI Certified)

  • project 7

    Premia (Tile Adhesive ISI)

  • project 9

    Admix (For Grout)

  • project 9

    Tile Cleaner

  • project 9

    Rebclean Power

  • project 9

    Acryfin 2K

  • project 9

    Shivfloor - SLC

  • project 9

    Metallic Floor Hardener

  • project 9

    Color Floor Hardener Proofing

  • project 9

    Cementitious Water Proofing

  • project 9

    Acrylic Polymer Modified WPC

  • project 9

    Concrete Water Proofing Admixture

  • project 9

    Corrosion Protection Coatings

About Our Product Details

We are the leading Manufacturer of Tile Adhesive , Wall Putty, Grouts , Epoxy & Spacer, Epoxy Resin & Hardener, Water proofing, Floor Hardener ,Transformer Oil, Shuttering Oil, Cutting Oil, Hydraulic Oil, Grease & Others ,Interiors, Exteriors, False Ceiling & Office Partitions ,etc.

About Us

The Company was ESTABLISHED in 1992. Our Company Manufactures tile Adhesive, Grouts, Epoxy, Wall putty, Acc Block Mortar, Admixture, Floor hardner & many more products.Shivam Enterprises Inc. (Our Company) is committed to strive customer delight by manufacture and supply of products through continual improvement. We sell our products all over India.

Our Clients

Enquiry Form

If You want to Know about any product please send me your message.

Enquiry Form

Please enter name.
Please enter valid email adress.
Please enter your comment.

Contact Us

Our Address

SHIVAM ENTERPRISES

Address Karala, Main kanjhawala Road, Delhi-110081(India)
Contact No. 9212651222 / 9312233569
Mobile No. +91-9810349817 ( MR.Sanjay Kohli )
Email ID shivamenter9001@yahoo.in

We Are Social